Select Page

Pegasus ⁄⁄ S4

Building on 15 years of innovation, the Trimax Pegasus was refined and re-released in 2017. The result – Pegasus Series 4, which offers 15% less grease points and an incredible 35% less in maintenance costs.

The Benchmark in Wide Area Mowing.

After 15 years leading the market, the Trimax Pegasus has established itself as the benchmark in wide-area mowing for parks, reserves, airports, racetracks, sport fields and turf farms.

Available in 4.9m, 6.1m and 7.2m widths, the Pegasus S4 is an exceptionally low-maintenance trailed rotary mower. With the number of grease points reduced and the introduction of Trimax SteadFAST Sealed Spindles and LocTEK Stubless Rollers, maintenance costs have never been so low.

New for 2020 is the Trimax Drive Protect System which is fitted to all Pegasus lift options as standard. Fully electronic, it features built-in sensors to prevent the mowing decks from lifting in unsafe conditions, or until the blades have ceased spinning.

View for yourself the benefits of Trimax Pegasus by booking a free demonstration today.
Book a Demo
Download a catalogue

PEGASUS ⁄⁄ S4 Features.

The below features come as standard on all Pegasus S4 mowers:

Pegasus S4 Red
Pegasus-S4
Pegasus-S4 Red
Pegasus S4 mower

STEADFAST SPINDLES

With no spindle greasing required maintenance is extremely low and productivity enhanced.

Full Width Rollers

FULL WIDTH ROLLERS

Full width front and rear rollers follow contours and provide excellent anti-scalp protection.

LazerBladez

LAZERBLADEZ

Achieves a superior cut and finish and are more cost efficient than cylinder reels or solid blade beams.

Rear rollers

ROAD SAFETY FEATURES

Comes with towing safety chains, mudguards and LED lights for road transport.

Rear rollers

SUSPENSION

The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.

LocTEK

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavities.

Pegasus S4 Red
Pegasus-S4
Pegasus-S4 Red
Pegasus S4 mower
LazerBladez

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

3 Year Warranty

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. 

LocTEK

LOCTEK

A stubless roller retention system for vastly improved alignment, bearing life and replacement ease.

Rear rollers

LOW MAINTENANCE

We’ve reduced grease points by 15%, and maintenance costs by 35% compared to the Trimax Pegasus S3.

Rear rollers

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

Pegasus⁄⁄ S4 Options.

Features Icons_QuikLIFT

QUIKLIFT

Enables mower decks to be raised slightly to traverse paths without disengaging the PTO. Protects cool season grass from damage when turning and allows effective striping of turf. Fitted with Drive Protect for machinery protection and bystander safety. (Not currently available on Pegasus 722).

Features Icons_MultiLIFT

MULTI LIFT SYSTEM

The MultiLIFT System (MLS) is a combination of QuikLIFT and IndividualLIFT with the addition benefit of BiLIFT (rear deck only mowing) for narrow gateways and driveways. Fitted with Drive Protect and timed blade spin down for machinery protection and bystander safety. (Not currently available on Pegasus 722). Click here to learn more about MLS.

Features Icons_Anti Bounce Skids

ANTI-BOUNCE SKIDS

Ideal for high speed mowing, the Anti-Bounce Skids reduce the ‘scalping’ effect when mowing on turf which is uneven. Helps to ease the mower over humps between the front and rear rollers.

Features Icons_Electric Brakes

ELECTRIC BRAKES

Electric Brakes reduce braking force needed from the tractor and include an adjustable brake controller with proportional boost for improved performance. The brakes can also be de-activated while moving.

Features Icons_Spare Tyre

TURF TYRES

Trimax Turf Tyres help distribute the weight of the mower for less ground disturbance. Recommended for Turf Farms or fine turf applications. Turf tyres are not suitable for road transport.

Features Icons_Galvanized

GALVANIZED

Hot-Dip Galvanizing provides added protection against corrosion. This is especially useful in coastal environments with high salt concentrations and applications with high fertiliser usage. (Not currently available on Pegasus 493.)
Features Icons_Roller Scrapers

ROLLER SCRAPERS

Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris.

Features Icons_Remote Unlock

REMOTE UNLOCK

The Remote Unlock option replaces the standard transport lock release rope with an electric actuator. This is operated by a push button within the tractor cab.

Features Icons_Safety Storage Kit

Road Registration Lighting Kit

Add a light pole with flashing beacon, number plate light and clearance lights, allowing for road registration. (Please check your State for compliance requirements).

Features Icons_Quattro

QUATTRO BLADE SYSTEM

This system adds 2 more blades to each spindle (2 flat & 2 upturned) for a finer cut on warm season grasses.

Features Icons_Spare Tyre

SPARE TYRE KIT

An easy and convenient mounting kit for attaching a spare tyre to the mower.

SPECIFICATIONS.

Cutting Width 4926 mm (194″) No. of Blade Spindles 9
Overall Width 5082 mm (200″) Approx Weight 2200 kg
Width (Transport Mode) 2500 mm (98″) Minimum PTO Output 60 hp
Overall Length 4375 mm (172″) Warranty (Years) 3
Cut Height Range 10-100 mm(⅜” – 4”)    
Cutting Width 6074mm (239”) No. of Blade Spindles 11
Overall Width 6230mm (245”) Approx Weight 2429 kg
Width (Transport Mode) 2500mm (98”) Minimum PTO Output 65 hp
Overall Length 4375 mm (172”) Warranty (Years) 3
Cut Height Range 10-100 mm(⅜” – 4”)    
Cutting Width 7235mm (285″) No. of Blade Spindles 13
Overall Width 7366mm (290″) Approx Weight 2700kg
Width (Transport Mode) 2500mm (98″) Minimum PTO Output 70 hp
Overall Length 4375mm (172″) Warranty (Years) 3
Cut Height Range 10-100 mm (⅜” – 4”)    

Download our
catalogue.

Click here to download our digital PDF product catalogue.

Download catalogue

Book a free
Demonstration.

Interested in seeing a Trimax mower in action in your application? View the performance and benefits first-hand.

Book a demo today

Buy genuine
Trimax Parts.

Visit our online Trimax Parts Store to purchase genuine parts, delivered direct to your door.

Buy parts now

ANTI-BOUNCE SKIDS

REMOTE UNLOCK

Unlock the mower wings’ transport lock from within the tractor cab using the tractor’s hydraulic remote.

 

MULTI-LIFT SYSTEM

LOW HP REQUIREMENTS

The open deck design for grass processing, efficient belt drive system and a short mower front-to-rear allows for use on lower HP tractors.

 

ADVANCED ENGINEERING

Trimax’s meticulous design process combined with bespoke, innovative manufacturing technologies produce the most accurate rotary cut in the market.

 

COMPACT TRACTOR SUITABLE

Able to be paired with tractors as low as 25 hp, perfect for smaller budgets and compact tractors.

 

STRIPING CAPABLE

Full width front and rear rollers produce beautiful striping.

 

ANTI-WEAR SKIDS

Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

REMOTE UNLOCK

The Remote Unlock option replaces the standard transport lock release rope with an electric actuator. This is operated by a push button within the tractor cab.

 

FRONT CASTOR WHEELS

Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

SUSPENSION

The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.

 

WASH PORTS

Belt cavity wash ports for all decks.

 

SAFETY FEATURES

Safety chains, mudguards and LED lights for road transport.

 

TURF TYRE

Trimax turf tyres help distribute the weight of the mower for less ground disturbance.

 

WHEELS RUN ON CUT GRASS

As the rear deck is located between the rear transport wheels, grass is not flattened by the wheels prior to mowing, a feature unique to Trimax.

 

ULTIMATE CONTOUR-FOLLOWING

Contour-following and cut quality is compromised when decks are over 3m wide. The X-WAM features multiple smaller decks for superior cut quality.

 

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

 

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.

 

ROADSIDE ROLLER

Comes standard with a heavy duty roller with 1/2″ wall thickness. Suitable for more demanding applications such as roadsides.

 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFETY

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Designed to complement compact tractors, Striker retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUIKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, paths and pavements.

 

AUTOMATIC BELT TENSIONERS

Eliminates the need for belt adjustments and improves drive to the spindles and blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry